Woodworking Plans

🔥+ Woodworking Plans 13 Jul 2020 These ideas will show you how to organize a shed for maximum storage capacity. ... DIY Storage Shelves - Blue Totes on Garage Shelves ... If you plan on storing bulky items, make sure you somehow attach or bolt the units to ...

Woodworking Plans This DIY homemade dust, wood + furniture polish spray is a safe, affordable + natural cleaning alternative to toxic store-bought cleaners.

Diy Cnc Milling Aluminum

Project Guide

  • Woodworking Planshow to Woodworking Plans for Time Required: Over 1 day

  • the 1 last update 2020/07/13 Difficulty: Difficulty: Advanced


An efficient and safe wheelchair ramp for 1 last update 2020/07/13 may be necessary for home accessibility when family members or regular visitors are unable to use stairs. The Americans with Disabilities Act provides standards for how to build a ramp in public areas but you can use those recommendations as guidance when building a ramp for your home.An efficient and safe wheelchair ramp may be necessary for home accessibility when family members or regular visitors are unable to use stairs. The Americans with Disabilities Act provides standards for how to build a ramp in public areas but you can use those recommendations as guidance when building a ramp for your home.

Woodworking Planshow to Woodworking Plans for

This guide outlines how to build a wheelchair ramp, including design specifications regarding ramp slope and width, the materials and tools needed for construction and also how to build a ramp for a shed.

Measure for Ramp Length and Design

There are several key requirements for how to build a ramp following ADA guidelines. Consider them as you develop your wheelchair ramp plans. Carefully choosing the ramp’s location and design is an important step.


Measure the distance between the ground and the threshold to find the rise of the ramp. The rise of single ramp run must not exceed 30 inches. If your threshold is more than 30 inches from the ground, two or more ramp sections will be necessary and separated by level landings. 


Slope is the proportion of vertical rise to horizontal length. The steepest slope permitted by the ADA is ratio of 1:12, meaning that the ramp rises one inch for every 12 inches in length. A ratio of 1:16 is not as steep and therefore easier to navigate with a manual wheelchair; a 1:20 slope requires even less effort but is longer in length and will require more materials.


To determine how far the ramp will project horizontally from the threshold, multiply the rise by the desired slope and then divide that figure by 12 to convert the measurement to feet. For example, a 30-inch rise multiplied by 1:16 slope equals 480 inches. That length divided by 12 equals 40 feet, the horizontal distance the ramp will extend from the threshold.

Woodworking Planshow to Woodworking Plans for

Woodworking Planshow to Woodworking Plans for If your yard is too small to accommodate that length in one straight run, use turns and landings between multiple sections of ramp.

Additional Ramp Specifications

Keep these additional specifications in mind when planning how to build a ramp. 


  • The width of the ramp must have a minimum of 36 inches of clearance between handrails.
  • Handrails 36 inches high are required on both sides of the ramp if the rise is greater than 6 inches.
  • Resting landings between single runs must measure at least as wide as the run and be 60 inches long. 
  • Landings on ramps that change direction between runs must measure at least 60- x 60-inches to allow for wheelchair turns and/or resting. An entrance landing should be similarly sized to allow for the door to open.
  • The cross-slope must be less than 1:48 and the ramp surface must be stable and slip-resistant.
  • The bottom and the top of the ramp should have a smooth transition to prevent wheels from becoming stuck when entering or exiting the ramp.

A concrete ramp is a permanent solution for how to build a wheelchair ramp and requires little maintenance but can be pricey. Steel or aluminum can be used for construction, too, but using lumber for ramps is the least expensive option. Like a deck, ramps made from pressure treated wood are sturdy and resilient when properly built and maintained.

Woodworking Planshow to Woodworking Plans for

Wood is more DIY-friendly than other options and can be made using common tools such as hand the 1 last update 2020/07/13 saws or circular saws for cutting the lumber and drills for driving screws for the framework and surface decking.Wood is more DIY-friendly than other options and can be made using common tools such as hand saws or circular saws for cutting the lumber and drills for driving screws for the framework and surface decking.


To be sturdy enough for a heavy electric wheelchair, a ramp’s 2- x 6-inch lumber framework can be fixed to 4- x 4-inch posts set in concrete footings below the frost line. Common 5/4- x 6-inch deck boards can be used for the surface and secured with exterior deck screws.


Check with your local building the 1 last update 2020/07/13 inspector regarding your handicap ramp plans to obtain any necessary building permits before beginning any construction.Check with your local building inspector regarding your handicap ramp plans to obtain any necessary building permits before beginning any construction.


Also, consider pre-built accessibility ramps to determine if these alternatives will suit your temporary needs.

Woodworking Planshow to Woodworking Plans for Shed Ramps

Learning how to build a ramp for a shed is not as complex as building a ramp for accessibility but there are still plenty of variables.


  • Determine the rise needed and the desired slope. The rise for sheds is often only several inches and riding mowers can easily handle a 1:8 slope.
  • Pressure-treated lumber rated for ground contact should be used to build a shed ramp. Use a circular saw to cut triangular stringers based on your rise and slope measurements.
  • The nominal size of the boards you select depends on the ramp rise. For example, 2- x 6-inch lumber could be used as stringers if the rise is less than 5 1/2-inches; a rise greater than that would require a 2- x 8-inch board.
  • A ramp 4-feet wide will use four stringers; two at each outside edge and two evenly spaced inside.
  • Brace the high end of ramp with a 2-inch board that has been cut to length and rip-cut to the height of the rise. Use 3-inch exterior deck screws to attach it to the each of the stringers.
  • For additional support, cut smaller lengths of lumber to fit snugly in between the stringers and fasten with the screws.
  • Use 2- x 6-inch boards for the ramp surface. Cut them to length and secure to each stringer with the deck screws.
  • Stain or paint as desired. Use slip-resistant tape if extra traction is needed.